新闻动态

首页 > 新闻动态
井盖模具在使用和养护方面要有较大的规范性
发布人:管理员   发布时间:2019-12-9

井盖模具在使用和养护方面也有较大的规范性,模具在使用时,应轻拿轻放,地面上最好铺上一层稻草或者破袋子,放下的时候要从一边开始放下.

Well cover mould also has great standardization in use and maintenance. When using the mould, it should be handled with care. It is better to pave a layer of straw or broken bag on the ground, and put it down from one side


灌入混凝土的时候,保持模具的底部是平坦的,经震动平台震动的时候如果是批量生产要按一个方向排开,取下来的时候放在室内干燥的地方.

When pouring concrete, keep the bottom of the mold flat. When vibrating through the vibration platform, if mass production is to be arranged in one direction, put it in a dry place indoors when taking it down


脱模完成后,将模具的内壁外侧都要清理干净,因为钢制的模具在使用一段时间后表面就会磨损,各个零件也会脱落,所以要及时清洁处理,放在洁净的地方储备以便下次使用.

After demoulding, clean the inside and outside of the mold. Because the steel mold will wear after using for a period of time, and all parts will fall off, clean it in time and store it in a clean place for next use

                                              


质量好的井盖模具,由于模具漏水效果比较好,在搅拌混凝土的时候也不需要放太多的水,这样一来,在很大程度上就提高了水泥件的干燥程度。

For the well cover mould with good quality, due to the good leakage effect of the mould, it is not necessary to put too much water when mixing the concrete, so that the drying degree of the cement parts is greatly improved.


成型速度快了,生产量就会提高很多.所以客户在选择的时候要从多方面考虑,不能只注重价格因素,选择适合自己工程的模具产品才最重要.


If the molding speed is fast, the production volume will increase a lot. Therefore, when customers choose, they should consider from many aspects, not only pay attention to the price factor, but also choose the mold products suitable for their own projects

上一篇:没有了