新闻动态

首页 > 新闻动态
井盖模具结构设计注意事项
发布人:管理员   发布时间:2023-4-10

我国井盖模具的设计和制造水平有了很大提高,目前,我国模具业发展势头向好,随之,机床工具业应重视其发展新需求,以实现双方共赢的局面。
The design and manufacturing level of our country's curbstone mold has been greatly improved. At present, the development momentum of China's mold industry is getting better. Therefore, the machine tool industry should pay attention to its new development needs, so as to achieve a win-win situation for both sides.

设计井盖模具结构时,切记结构紧凑、方便操作,同时保证井盖模具有较高的强度和刚度;模具结构允许时,零件各表面的转角应尽可能设计成圆角过渡,以防止应力集中。
When designing the mold structure of curbstone, it should be noted that the structure is compact and easy to operate, and the mold should have high strength and rigidity. When the mold structure allows, the corner of each surface of the part should be designed as fillet transition as possible to prevent stress concentration.

         

对于凹模、型腔及部分凸模、型芯,可采用组合或镶拼结构来消除应力集中,细长凸模或型芯,结构上需采取适当的维护措施;对于冷冲模,应配置防止制件或废料堵塞的装置。
For the female die, cavity and part of the punch and core, the combined or inlaid structure can be used to eliminate the stress concentration. For the slender punch or core, appropriate maintenance measures should be taken in the structure; for the cold stamping die, the device to prevent the blocking of parts or waste materials should be provided.

有些厂家只顾自己的利润往往生产出来一些质量不可靠的井盖模具设备,所以客户在选购井盖模具设备时一定要选择质量稳定信誉可靠地井盖模具制造厂家才能够让以后的生产没有烦恼。
Some manufacturers only care about their own profits, and often produce some unreliable quality curbstone mold equipment. Therefore, customers must choose the reliable and stable quality curbstone mold equipment when purchasing the curbstone mold equipment, so that the future production will not be bothered.

上一篇:没有了